| Component | Confirmed project specification | Strategic brand value |
|---|---|---|
| Box structure | Folding lid box | Creates a deliberate reveal for cosmetics presentation |
| Structural board | 1200g double-grey board | Provides a substantial rigid foundation for the folding format |
| Outer lining paper | 150g white kraft | Creates a clean, warm-white canvas for the House of Ember identity |
| Main finishing process | Gold foil stamping | Adds a controlled metallic focal point to the lid artwork |
| Foil reference in supplied PDF | Mingliyuan K8850 matte gold | Provides a starting material reference for physical foil sampling |
| Insert | 300g coated-paper insert | Provides a paper-based presentation component that must be formed and fitted accurately |
| Insert process | Precision die-cutting | Supports repeatable cavity, fold and edge geometry |
| Customer source | Australia | Informs the B2B project context; it does not establish logistics, compliance or market claims |
| Customer industry | Cosmetics | Makes presentation quality, branding and product fit central to the packaging brief |
For a cosmetics brand, the packaging has to establish product value before the inner product is fully revealed. The House of Ember project uses a folding lid box built around a 1200g double-grey board core, wrapped with 150g white kraft paper, finished with gold foil stamping and completed with a precision die-cut 300g coated-paper insert.
The supplied references show a warm white exterior with a refined gold logo and a dark interior presentation area. This contrast places the engineering focus on three visible outcomes: a clean and stable folding structure, a controlled foil impression on the white-kraft surface and an insert that forms accurately inside the box.
A 1200g double-grey board creates a substantial rigid foundation. The board weight supports a premium hand feel, but the final folding-lid geometry still depends on board flatness, crease design, hinge-area construction, lining-paper tension and forming pressure.
The objective is to maintain clean panel alignment when the box is closed and a controlled opening relationship when the lid is folded back. Heavy board does not eliminate the need for structural control; it makes conversion and forming discipline more important.
The white-kraft outer surface is intentionally quiet. On a light, relatively open visual field, glue marks, fingerprints, dust, edge contamination, dents and uneven paper tension can be more visible than on a dark or heavily printed surface.
The paper application process must therefore protect the surface from the first handling step through foil stamping and final assembly. Clean work surfaces, controlled adhesive application and careful pressing are central to the finished appearance.
The reference images show gold foil branding on the lid. Foil quality depends on the interaction between the foil, stamping temperature and pressure, die condition, paper surface and artwork detail. Fine serif lettering and small decorative lines require particular attention because incomplete transfer, spread edges or weak definition can affect brand legibility.
The supplied PDF text layer identifies the gold foil as Mingliyuan K8850 matte gold. That foil reference is treated as a document-supported project detail, while final foil colour, die and stamping parameters remain subject to approved sampling.
The 300g coated-paper insert must be converted from a flat die-cut sheet into a formed presentation component. Its accuracy affects the product cavity, edge alignment, corner appearance and overall fit inside the 1200g-board box.
The insert should therefore be reviewed in both flat and formed states. A die line can look correct on the sheet and still show fit or folding issues after the paper is creased, folded and installed.
The visual references show a dark interior presentation area against a warm white exterior. This transition makes the alignment of the lining paper, insert edges and lid interface particularly important. Any exposed edge, offset panel, irregular corner or adhesive mark can interrupt the intended contrast.
The interior finish should be checked as a complete visual field, not only as separate paper pieces.
The supplied drawing filename includes “magnetic” and shows two circular positions in the drawing. The current written brief says “folding lid box” but does not explicitly list magnets in the process or material specification.
The production file should confirm whether these positions represent magnets, another closure component or drawing references. Until confirmed, the case study describes the structure as a folding lid box and does not claim a magnetic closure as a final specification.
The House of Ember project demonstrates how a restrained cosmetics package depends on precise execution. The 1200g double-grey board gives the folding box its rigid foundation; the 150g white kraft creates the clean visible surface; the gold foil defines the brand focal point; and the precision die-cut 300g insert completes the product presentation.
The strongest production result will come from approving these elements together. Structural alignment, white-kraft cleanliness, foil definition, insert fit and closure details should be evaluated as one assembled package before the production file is released.
The PackTonTon Engineering Team recommends that the buyer approve a complete physical sample covering the closed box, open box, foil detail, insert fit and any confirmed closure hardware. This approach prevents a visually acceptable individual component from creating an assembly problem later in the process.
The current project specification uses 150g white kraft wrapped around a 1200g double-grey board core. The box is finished with gold foil stamping and paired with a 300g coated-paper insert made through precision die-cutting.
The supplied drawing filename includes “magnetic” and shows circular positions, but the current written brief only confirms a folding lid box and does not list magnetic hardware. The closure specification should be confirmed against the approved dieline before it is treated as a final feature.
The recommended process uses clean tools and work surfaces, controlled adhesive application, careful paper positioning, controlled pressing and inspection before and after foil stamping. Particular attention is given to glue marks, dirt, dents, bubbles and edge lifting.
The insert is specified as a 300g coated-paper insert made through precision die-cutting. The formed insert should be checked inside the finished box because flat die-line accuracy alone does not confirm the final fit.
Share the product dimensions, product quantity, artwork status, preferred closure, insert cavity requirements and target sample timing. The approved dieline or product drawing is also useful for checking structure and fit.