| Component | Current project specification | Strategic brand value |
|---|---|---|
| Box structure | Magnetic lift-top box | Creates a controlled opening ritual for a wellness supplement set |
| Structural core | 1200g single-white board | Provides a substantial rigid base for lid, spine and closure alignment |
| Outer paper | 157g coated paper | Provides a smooth printed surface for brand communication and finishing |
| Printing | 4C printing | Supports detailed product and brand graphics |
| Surface finish | Soft-touch anti-scratch matte coating | Adds tactile contrast and helps maintain a refined handling surface; final performance should be confirmed by sample |
| Foil | Mingliyuan C1105 hot foil | Creates the metallic brand focal point; completeness and registration require physical approval |
| Closure | Magnetic closure | Requires controlled pocket position, polarity, depth and surface-flatness checks |
| Insert | 25mm white Furong cotton, current written brief | Creates shaped product presentation and cushioning geometry; thickness definition must be reconciled with the PDF |
| Insert process | Laser engraving + velvet wrapping | Adds personalised cavity detail and a soft visible surface |
| PDF-level insert note | 10mm velvet-wrapped white Furong cotton + 15mm white Furong cotton | Drawing-level configuration requiring confirmation against the current 25mm brief |
| Customer source | Australia | Defines the project’s B2B customer context; it does not establish regulatory claims |
| Customer industry | Wellness food supplements | Makes product organisation, ritual opening and surface credibility important |
For wellness food supplements, the presentation box must organize multiple daily-use items while creating a clear, premium opening ritual. The Brevé project combines a magnetic lift-top structure with a 1200g single-white board core, a 157g coated-paper printed surface, soft-touch anti-scratch matte protection, Mingliyuan C1105 hot foil stamping and a shaped white-cotton insert finished with laser engraving and velvet wrapping.
The visual references show a restrained warm-white exterior with rose-gold or metallic foil branding. Inside, shaped white foam components create dedicated presentation positions for daily stick packs and accessories. The project’s engineering value lies in coordinating rigid-board forming, printed-surface protection, foil detail, magnetic closure and insert thickness in one assembled package.
The 1200g single-white board gives the box a substantial rigid foundation. When combined with 157g coated paper, the finished structure depends on board flatness, paper tension, crease geometry, adhesive distribution, folding sequence and pressing conditions.
A thick board can create a confident hand feel, but it can also amplify problems at the fold-back area, corners and lid-to-base transition. The engineering objective is a lift-top box that closes evenly, presents clean panel lines and retains a stable opening relationship without visible distortion.
The 4C artwork must remain visually clear after the soft-touch anti-scratch matte coating is applied. Coating coverage, drying, surface cleanliness and handling can influence the tactile finish and the appearance of fine type, brand marks and background colour.
The print and coating stages should therefore be approved as a combined surface system. A print sample that looks correct before coating does not by itself confirm the final tactile or visual result.
The Brevé references show a refined metallic logo treatment. The supplied brief and PDF identify Mingliyuan C1105 as the foil reference. The key controls are foil transfer continuity, edge definition, registration to the printed artwork and the relationship between foil reflectivity and the soft-touch matte surface.
The logo contains delicate letterforms and small details. These features need a physical sample on the actual coated surface so that foil completeness and position are judged under production-representative conditions.
A magnetic lift-top box is judged immediately by the interaction between the lid and base. Magnet pockets, opposing polarity, depth, alignment and cover-layer thickness all influence whether the closure meets cleanly and whether the lid surface remains flat.
The magnets should not be evaluated only by attraction strength. The finished box must also be checked for lid-to-base alignment, local bulging, visible impressions, edge offset and smooth opening behaviour.
The current brief calls for a 25mm white Furong cotton insert with laser engraving and velvet wrapping. The PDF shows a 10mm velvet-wrapped white Furong cotton element and a separate 15mm white Furong cotton element.
This is a critical dimensional reconciliation point. The cutting file, product cavity and finished-box height should be based on the customer’s confirmed definition of 25mm—not on an assumption that 10mm plus 15mm automatically equals the required finished build. The final approval should identify each foam component, its position, its finished thickness and whether the measurement includes the velvet wrap.
The Brevé project combines a heavy rigid board, a tactile coated surface, metallic foil branding, magnetic closure and a shaped velvet-wrapped insert. Each feature affects the others: the insert height influences lid clearance; magnet depth affects surface flatness; the soft-touch coating affects foil approval; and the thick board influences fold-back and alignment.
The PackTonTon Engineering Team recommends a complete-system approval before production release. The approved sample should show the finished print and coating, C1105 foil, magnetic closure, closed-box flatness, open-box geometry and the confirmed foam thickness configuration.
The most important unresolved item is the difference between the current 25mm insert requirement and the PDF’s 10mm/15mm foam labels. Resolving this point before laser engraving and velvet wrapping will reduce the risk of cavity-height mismatch, lid interference or inconsistent product presentation.
The current project specification uses 157g coated paper wrapped around a 1200g single-white board core. The surface is finished with 4C printing, soft-touch anti-scratch matte coating and hot foil stamping.
The closure should be controlled through a placement map covering magnet position, polarity, pocket depth, cover-layer thickness and final lid flatness. The completed box must be checked from closed and open positions after the insert is installed.
The current written brief specifies a 25mm white Furong cotton insert. The supplied PDF shows a 10mm velvet-wrapped Furong cotton component and a separate 15mm Furong cotton component. The customer must confirm whether these are separate zones or a combined build before the cutting and laser files are released.
The current brief specifies laser engraving and velvet wrapping on the white Furong cotton. Final laser artwork, cavity depth and velvet coverage should be approved on a production-representative insert sample.
Share the product and accessory dimensions, required foam thickness definition, artwork, quantity, closure preference and target sample timing. The approved dieline or product drawing is also needed to confirm the magnet and insert relationship.